Lessons Learned About Improvements

Decorate Your Home or Office with Crown Moulding

There is now a trend in homes or offices to put an ornamental piece of wood, metal or plaster that will decorate chosen areas, and this is called crown moulding. Decoration of this material can be implemented on the exterior or interior of your home or office. Mouldings are installed to frame the walls, ceilings, windows, and door openings of your home or offices.

The areas from your wall to ceiling will have nice effect with the use of this decorative trim called the crown moulding. Imagine choosing a crown moulding for an expensive painting to gauge its importance. It is important to choose your crown moulding in relation to the design of your home to avoid negative attention. Be careful not to choose the design of your crown moulding to be not too simple or not too big or small so as not to cheapen the area where it is installed. Some homeowners would choose crown moulding to suit their personal style, and this shows the importance of this accent piece.

Crown moulding is generally installed along the seams where the wall meets the ceiling in a room.
Interesting Research on Houses – What You Didn’t Know

By installing crown moulding in your home or office will increase the value of your place, aside from the beauty and glamour it gives.
6 Facts About Houses Everyone Thinks Are True

There are some guidelines to follow before a crown moulding is installed.

Your number one guideline is to locate all the studs in the ceiling joist and walls. This can be done by making some light pencil marks on the point where you see the moulding up when nailing it.

The next step is to find out which way the ceiling joists are running. The importance of this is because you have only the nailers for the top of the moulding on two of the four walls, if your room is a square.

The size of your triangle nailer can be found easily by using a framing square. The nailer actually does not need to fit perfectly in order to work effectively.

Another tip is not to force the nailer to the moulding that in effect will not sit flush against the wall and ceiling, and do this by leaving a little room.

Another preparation is the installation of the nailers on the walls excluding ceiling nailers. Position the nailer against the wall and ceiling, then pre-drill the nailer using a counter sink drill bit into the studs on the walls. Afterwards, use a 3 inches coarse thread drywall screw for attaching to the stud.

The next guideline is to provide a reference line on the wall on where the height of the moulding would sit on the wall. This can be done by taking a piece of scrap moulding, place it against the wall and ceiling in a proper way, and then writing lightly on the wall with a pencil at the bottom of the moulding.